Skip to content
Hobart Handler® 100
The Hobart® Handler® 100 flux-cored welder is a 100-amp wire welder that operates on 115 volt input power and comes ready to weld .030 flux-cored welding wire. It can weld up to 3/16 inch thick steel and is ideal for performing farm and ranch or home/hobby maintenance and repair welding jobs. Flux-cored welding requires no shielding gas cylinder and is an excellent alternative to stick welding.
Features
- Broad output range of 30 -100A - Allows you to weld up to 3/16 in. (4.8 mm) steel with flux-cored wire.
- Four output voltage settings - Four voltage ranges allow you to adjust the arc for different thicknesses.
- Spool hub assembly accommodates 4- or 8- inch spools - Offers you flexibility to use small or large spools of wire to better suit your welding needs.
- Built-in contactor - Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
- Durable feed head with quick-release drive roll tension lever - Positive feed with adjustable tension gives you easy access to thread new wire.
- Short circuit protection - Protects unit against current overload.
- Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.
WHAT'S INCLUDED
- Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030 - .035 in. (0.8-0.9 mm) diameter wire
- Work cable with clamp
- .030 in. (0.8 mm) contact tips
- Power cord with plug
- Weld set-up chart
- Owner's manual with parts list, installation, operation and maintenance guidelines.
| Item | Handler 100 Flux-Cored Welder |
| Industries Interests | Farm and Ranch / DIY / Hobbyist |
| Material Thickness | Mild Steel 18 ga. - 3/16'' |
| Weldable Metals | Steel |
| Input Voltage | 110 / 115 / 120 V |
| Input Phase | 1-Phase |
| Input Hz | 60 Hz |
| Current Type | DC |
| Rated Output | 80 Amps @ 20% Duty Cycle |
| Max Open Circuit Voltage | 40 VDC |
| Wire Feed Speed | 90 IPM - 320 IPM |
| Wire Diameter | Flux Cored 0.03'' - 0.035'' |
| Weld Output | CV |
| Net Width | 10'' |
| Net Height | 13.5'' |
| Net Length | 16'' |
| Net Weight | 44 lbs |
Hobart Handler® 100
The Hobart® Handler® 100 flux-cored welder is a 100-amp wire welder that operates on 115 volt input power and comes ready to weld .030 flux-cored welding wire. It can weld up to 3/16 inch thick steel and is ideal for performing farm and ranch or home/hobby maintenance and repair welding jobs. Flux-cored welding requires no shielding gas cylinder and is an excellent alternative to stick welding.
Features
- Broad output range of 30 -100A - Allows you to weld up to 3/16 in. (4.8 mm) steel with flux-cored wire.
- Four output voltage settings - Four voltage ranges allow you to adjust the arc for different thicknesses.
- Spool hub assembly accommodates 4- or 8- inch spools - Offers you flexibility to use small or large spools of wire to better suit your welding needs.
- Built-in contactor - Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.
- Durable feed head with quick-release drive roll tension lever - Positive feed with adjustable tension gives you easy access to thread new wire.
- Short circuit protection - Protects unit against current overload.
- Self- resetting thermal overload protection - Protects power transformer from thermal overload to provide you maximum reliability.
WHAT'S INCLUDED
- Comfortable 8 ft. (2.4 m) H100F2-8 gun with liner for .030 - .035 in. (0.8-0.9 mm) diameter wire
- Work cable with clamp
- .030 in. (0.8 mm) contact tips
- Power cord with plug
- Weld set-up chart
- Owner's manual with parts list, installation, operation and maintenance guidelines.
| Item | Handler 100 Flux-Cored Welder |
| Industries Interests | Farm and Ranch / DIY / Hobbyist |
| Material Thickness | Mild Steel 18 ga. - 3/16'' |
| Weldable Metals | Steel |
| Input Voltage | 110 / 115 / 120 V |
| Input Phase | 1-Phase |
| Input Hz | 60 Hz |
| Current Type | DC |
| Rated Output | 80 Amps @ 20% Duty Cycle |
| Max Open Circuit Voltage | 40 VDC |
| Wire Feed Speed | 90 IPM - 320 IPM |
| Wire Diameter | Flux Cored 0.03'' - 0.035'' |
| Weld Output | CV |
| Net Width | 10'' |
| Net Height | 13.5'' |
| Net Length | 16'' |
| Net Weight | 44 lbs |
RECENTLY VIEWED
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.